Current through Register Vol. 64, No. 3, March 1, 2025
(1) The Person who owns or to whom the
Medium- or Heavy-duty Truck is registered must ensure each Medium- or
Heavy-duty Truck containing Approved Retrofit Technology has a legible and
durable label that complies with subsection (3) of this rule affixed to a
conspicuous location on the engine or engine compartment and affixed to the
Approved Retrofit Technology so that it can be easily read with the naked eye
during daylight with or without the assistance of artificial lighting or
reflective devices.
(2) No Person
may remove, modify, alter, or tamper with a label in any way after it is
installed.
(3) At a minimum, the
label shall include the following:
(a) A
unique identification number to be matched to the specific Approved Retrofit
Technology family name;
(b) The
Approved Retrofit Technology's manufacture name, address, and phone number;
(c) The Approved Retrofit
Technology's serial number;
(d)
The month and year the Approved Retrofit Technology was manufactured;
(e) The direction of the exhaust
flow in the Approved Retrofit Technology; and
(f) The Approved Retrofit Technology's family
name assigned by the installer of Approved Retrofit Technology in the following
format: CA or US/MMM/YYYY/BART#/APP/XXXXX, where:
(A) CA designates a retrofit device that
appears or previously appeared on the Currently Verified Diesel Emission
Control Strategy of CARB or that appears or previously appeared on the
Currently Verified Diesel Emission Control Strategy of CARB and that appears or
previously appeared Verified Technologies List for Clean Diesel of EPA;
(B) US designates a retrofit
device that appears or previously appeared Verified Technologies List for Clean
Diesel of EPA and that does not appear or has not previously appeared the
Currently Verified Diesel Emission Control Strategy of CARB;
(C) MMM designates and is to be replaced by
the manufacturer code. For a retrofit device that appears or previously
appeared on the Currently Verified Diesel Emission Control Strategy of CARB,
MMM shall be replaced by the manufacturer code assigned by CARB's Executive
Officer;
(D) MMM shall be replaced
by three zeroes (000) for a retrofit device that appears or previously appeared
Verified Technologies List for Clean Diesel of EPA; and
(E) YYYY designates and is to be replaced by
the year of verification.
Statutory/Other Authority: ORS
468A.810, ORS
468A.360 & ORS
468.020
