Oregon Administrative Rules
Chapter 340 - DEPARTMENT OF ENVIRONMENTAL QUALITY
Division 256 - MOTOR VEHICLES
Section 340-256-0358 - Emission Control System Inspection: Emissions Control Test Method for Self-Service Testing Program
Current through Register Vol. 64, No. 3, March 1, 2025
This rule documents the Self-Service test method.
(1) DEQ may provide a testing method whereby the vehicle owner or their representative will perform the emissions test. The test performed will be either a remote sensing optical quantification of the tailpipe pollutants, a remote or computer connected OBD test, or other means approved under section (4) of this rule.
(2) Before implementing Self-Service Testing under this rule, DEQ must establish specific Self-Service Testing processes in DEQ's policies and procedures documents, including:
(3) If DEQ uses the optical attenuation method for Self-Service Testing, 1975 and newer model year vehicles are eligible for Self-Service Testing. If DEQ uses broadcast data or hardwire cable connection from vehicles' OBD systems for Self-Service Testing, 1996 and newer model year vehicles are eligible for Self-Service Testing.
(4) If DEQ develops and implements additional test methods for use in the Self-Service Testing program, DEQ must develop documentation that such method will provide equal or greater accuracy in identifying vehicles that would pass or fail the otherwise required emission test.
Statutory/Other Authority: 468A.380(1)(c)
Statutes/Other Implemented: ORS 468A.350 - 468A.420